VALVE WORLD EXPO 2026 Guide: Dates, App, Badge Scanning and Follow-Up
VALVE WORLD EXPO 2026 takes place December 1 to 3 at Messe Düsseldorf in Düsseldorf, in Halls 1 and 3. Prepare questions around operating conditions, equipment interfaces and service needs, and record each contact's application and agreed follow-up.
Habsy12 min read
VALVE WORLD EXPO dates, hours and venue
- Dates
- December 1 to 3, 2026Exhibition dates
- Exhibition hours
- 9:00 AM to 6:00 PM dailyEurope/Berlin local time
- Venue
- Messe Düsseldorf, DüsseldorfHalls 1 and 3
- Entry
- Trade registration and ticket requiredConference registration checked separately
- Official website
- valveworldexpo.comConfirm details before you travel
Use the VALVE WORLD EXPO dates above to plan your days, and check the VALVE WORLD EXPO Messe Düsseldorf floor plan before you arrive.
Who exhibits and who attends VALVE WORLD EXPO?
Oil and gas, chemical, water, power-generation, and marine teams may assess equipment against different operating conditions and maintenance priorities. Ask about the process medium, pressure and temperature range, connection and material requirements, actuator or control interfaces, service access, and spare-parts needs. Suppliers should record the application, relevant technical constraints, decision process, and a specific next step rather than relying on a product-category note alone.
Who exhibits
- Valve manufacturers for process plants and infrastructure
- Component suppliers for valve assembly and maintenance
- Actuator specialists for automated flow control
- Pump and compressor makers for fluid handling
- Engineering, software, and service providers for plants
Who attends
- Oil and gas engineers evaluating service conditions
- Chemical and petrochemical teams comparing specifications
- Water and wastewater operators assessing control and maintenance
- Power-generation teams reviewing reliability and supply
- Marine and offshore engineers sourcing flow-control components
The exhibition is listed at Messe Düsseldorf in Halls 1 and 3. Use the hall information when planning supplier conversations, and check the official event information for current access details. The co-located technical conference has separate registration conditions; check the chosen session's location rather than assuming it is in the exhibition halls.
How to prepare for VALVE WORLD EXPO: tips for exhibitors and visitors
Most of the work happens before you reach Düsseldorf. Set up Habsy once and every conversation at the show ends with a saved contact, the context you need and a next step.
These VALVE WORLD EXPO exhibitor tips cover how to prepare for VALVE WORLD EXPO 2026, whether or not you also use the official VALVE WORLD EXPO app.
If you are visiting
Before you fly
- 1
Create your Professional digital card
Share your details by QR code, NFC or link instead of paper cards.
- 2
Add your Business digital card
Your company profile and brochures, for partners and suppliers you meet.
- 3
Create a category for VALVE WORLD EXPO
Plus the visitor intent signals below, to sort vendors by fit later.
- 4
Turn on Send my digital card back
Everyone you scan gets your card automatically.
If you are exhibiting
Before you fly, for every rep
- 1
Install Habsy on every rep's phone
Give each rep a digital card, plus one Business digital card for the company.
- 2
Set up intent signals and templates
Every rep qualifies and follows up the same way, by email or WhatsApp.
- 3
Add an enquiry form to your card
Print its QR code on the booth so visitors leave details when you are busy.
- 4
Create a campaign for VALVE WORLD EXPO
Bringing several reps? Every scan lands in one live list.
How to set up a lead capture app before VALVE WORLD EXPO
Five steps, in the order the app walks you through them. Visitors need steps 1 to 3. Exhibitors should do all five.
Habsy works as your VALVE WORLD EXPO lead capture app and VALVE WORLD EXPO mobile app in one, and step 1 gives you a VALVE WORLD EXPO digital business card.
1. Create your digital business cards
Every Habsy account includes two free digital cards under MyQR: a Professional digital card for you and a Business digital card for your company, with your services and brochures. Habsy's AI builds them from your LinkedIn profile and website, or from a photo of your own business card. Share them by QR code, NFC or link. The person you share with opens your card in their browser, with no app needed, and saves your contact in one tap. Add an enquiry form so visitors who scan your card leave their details and are saved as a new contact.

1Your Professional digital card

2Your Business digital card

3Share by QR code, NFC or link
2. Add intent signals
Intent signals are a built-in lead qualification form: tap-to-answer questions such as product interest, budget and timeline, answered in a few taps for every contact, so every rep records the same details. In Settings, open Manage Intent Signals, then tap Create with AI to get suggestions from your website, or Create Manually to add the set below.

1Open Manage Intent Signals

2Review the signals Habsy suggests

3Tap the answers after each scan
- Valve manufacturers
- Component suppliers
- Plant operators
- Engineering firms
- Maintenance providers
- Process engineer
- Procurement manager
- Maintenance lead
- Automation engineer
- Valves and components
- Actuators and positioning
- Pumps and compressors
- Process-control software
- Valve service and support
- Within 3 months
- 3 to 6 months
- 6 to 12 months
- Researching
- Book a demo
- Send a proposal
- Share a case study
- Introduce a colleague
- Valves and components
- Actuation and positioning
- Pumps and compressors
- Process-control software
- Inspection and maintenance
- Flow-control engineering
- Exhibit hall booth
- Session or reception
- Strong fit
- Possible fit
- Not a fit
- Book a demo
- Request pricing
- Share with my team
- No follow-up
Add them in Settings, Manage Intent Signals, with Create Manually, or start with Create with AI and adjust the options to match what you sell or what you are looking for.
3. Create a category for VALVE WORLD EXPO
Create a category called VALVE WORLD EXPO and set it as your default for the days of the event, so every contact you scan at the show is filed under it automatically. After the show, use it as a filter to export only your VALVE WORLD EXPO contacts to Excel, CSV or VCF in one step. Exhibitors on Habsy Platform can also use the VALVE WORLD EXPO category to track how the event performed: contacts captured, companies reached, intent signals and each rep's results.

1Create the category

2Pick it when you save a contact

3Find it on every contact
4. Set up your email and WhatsApp templates
Connect your email account or WhatsApp Business account in Settings before the show. Then, with Send email or WhatsApp template turned on in your Card Preferences, your follow-up goes out from your own account the moment you save a scanned contact. The visitor often has your message, and your digital card, before they leave your booth. It shows you are organized and quick to respond, and it puts you ahead of every exhibitor who follows up next week. To write the template, open Email Templates or WhatsApp Templates in Settings, describe the message, and Habsy's AI writes it. Add variables such as the contact's name and company so every message is personal. Here is a template you can copy for VALVE WORLD EXPO:
Hi {{recipient.name}},
It was good speaking with you at VALVE WORLD EXPO 2026. I would be glad to share relevant information on our valve and flow-control products and services.
Which application or operating requirement would be most useful to focus on first?
Best,{{user.name}}{{user.company}}
Hi {{recipient.name}}, this is {{user.name}}. Good speaking with you at VALVE WORLD EXPO 2026. I can send relevant valve or flow-control information. Which application or requirement should I focus on?
Words in braces are variables. Habsy fills them in from each contact and from your profile when you send.

1Let AI write the template

2Save your WhatsApp templates

3Save your email templates
5. Set your Card Preferences
Choose what Habsy does each time you save a contact, once in Settings or per save. It runs in the background while you move on to the next conversation.
Lena Hoffmann saved at VALVE WORLD EXPO · 4 steps running in the background
Email, WhatsApp and CRM steps need the matching integration.
How to scan VALVE WORLD EXPO badges and business cards with your phone
Use one lead capture app on your phone for every contact you make at VALVE WORLD EXPO, wherever you make it: at the booth, in a session, at a reception or over dinner. Every rep and every visitor captures contacts on their own phone, free and with no scan limit, and every contact lands in one list with your category, intent signals and notes.
The same app is your VALVE WORLD EXPO badge scanner, VALVE WORLD EXPO lead scanner and VALVE WORLD EXPO business card scanner, so VALVE WORLD EXPO badge scanning and card scanning end up in one list.

1Scan a business card

2Scan a badge QR code

3Type it in with manual entry
- Badges: point the Habsy scanner at a badge and Habsy reads the attendee's details from its QR code. If a badge holds only a registration number, scan the person's business card or type them in.
- Business cards: scan each card in seconds, or switch to Batch and scan up to 150 cards in about 5 minutes without leaving the camera. Habsy reads cards in 200+ languages.
- QR codes: scan digital business cards from any provider, LinkedIn QR codes and contact QR codes.
- NFC: turn on NFC on the scan screen, then hold an NFC business card or an NFC event badge to the back of your phone. Habsy reads the contact and saves it, with no camera needed.
- Manual entry: no card and no QR code? Choose Manual and type the details in.
- Offline: capture continues when the hall Wi-Fi is busy, and contacts process once you reconnect.
Many shows also sell official lead retrieval through the organizer. Habsy works on its own or next to it. For more, read lead capture vs lead retrieval.
Whichever you choose, compare VALVE WORLD EXPO lead retrieval with scanning on your own phones before you book.
How to qualify VALVE WORLD EXPO leads while you talk
A contact without context is hard to follow up. Before the next conversation starts, add what you discussed and what you promised.
- Intent signals: tap the answers on the review screen after each scan.
- Voice notes: tap Add Voice Note and say what they need. Habsy turns it into a searchable transcript.
- Text notes: type a quick note, such as "Check medium, range, and service access".
- Reminders: in 1 hour, in 4 hours, tomorrow at 9 AM or any date and time, with a repeat and an alarm. All of them appear in My reminders.
Here is what a contact from VALVE WORLD EXPO looks like with context added:
Lena Hoffmann
Maintenance Lead, Rheinwerk Process Systems
Intent signals
- Plant operators
- Maintenance lead
- Valve service and support
- Valves and components
- 3 to 6 months
- Book a demo
Notes
Illustrative: review service access and spare-parts needs for an existing line.
0:42 · "We need to understand maintenance needs before shortlisting equipment."
Reminder
Friday, 9:00 AM · Send service and maintenance questions
Fictional contact illustrating a conversation at VALVE WORLD EXPO 2026 on Tuesday, December 1, 2026, Messe Düsseldorf, Düsseldorf
Going to VALVE WORLD EXPO 2026?
Your digital card and lead capture in one app.
Start free with scanning, text notes, reminders and export. Plus adds intent signals, templates and analytics; Platform supports teams.
How to follow up after VALVE WORLD EXPO
The show ends on Thursday, December 3. What you do in the next 48 hours decides how many of those conversations turn into meetings, partners or deals.
If you visited: pick up the conversations you started
- See who looked at your card: open QR analytics to see how many people viewed and saved your digital card, how they engaged and where.
- Save and call back: save vendors to your phone contacts, and set a reminder to call back the ones you want to hear more from.
- Drop a message: Habsy writes a short email or WhatsApp message for any contact, mentioning where you met.
- Export and share: export your VALVE WORLD EXPO category to Excel, CSV or VCF, by date range, with a copy sent to your email, and share the shortlist with your team.
Top locations
Example numbers.

1Export to Excel, CSV or VCF

2Set a reminder to call back

3Send a quick message
If you exhibited: follow up within 48 hours
- Thursday evening: batch scan any cards left in your pockets and check that every contact has a note.
- Friday: filter by intent signals, such as "Book a demo" and "Within 3 months", and send your VALVE WORLD EXPO template to the hottest contacts first.
- Send at scale: select several contacts on the home screen, choose email or WhatsApp and a template, and send to all of them.
- Next week: work through the rest by reminder, sync qualified contacts to your CRM, and export the list to Excel, CSV or VCF.

1Write the follow-up with AI

2Pick a template for each contact

3Select several contacts and send
For more VALVE WORLD EXPO follow-up email ideas, see our follow-up email templates.
VALVE WORLD EXPO lead capture for exhibitor teams
When several reps work the booth, the hard part is not capturing leads. It is knowing, during the show and after it, who met whom, who is hot and who follows up. Habsy Platform is the web dashboard for that, at app.habsy.ai. Reps keep scanning in the app, and the manager sees everything in one place.
app.habsy.ai

- One campaign for VALVE WORLD EXPO: every rep's contacts land in one live list, by rep and by day.
- Clear ownership: assign contacts, set reminders, and get alerts when two reps meet the same person.
- Follow-up from one place: sync to your CRM and run email and WhatsApp follow-up for the whole team.
The VALVE WORLD EXPO post-event report
When the show ends, Habsy turns your VALVE WORLD EXPO contacts into a post-event report: what your team captured, who you met, what they told you through your intent signals, and a dossier on every company with how well it fits your business. Use it to decide who to call first and whether the next edition is worth the booth. Here is what it could look like for VALVE WORLD EXPO, with example data:
Post-event report · VALVE WORLD EXPO
Overview: what your team captured at VALVE WORLD EXPO, how complete it is, and what stands out.
Analytics: the kinds of organizations and the seniority of the people your team met at VALVE WORLD EXPO.
Intent signals: what contacts at VALVE WORLD EXPO are interested in, when they plan to buy and the next step your reps agreed.
Habsy Platform has one team price, with no per-event or per-lead fees. See Habsy for teams or explore the platform.
Bottom line
For valve and flow-control conversations, capture the operating conditions and service questions alongside each contact so the next discussion can focus on application fit. Visitors: create your digital card and scan every card and badge you collect. Exhibitors: set up intent signals and templates before you fly, capture every contact in one app, and follow up within 48 hours. See event lead capture with Habsy.
Bringing a team to VALVE WORLD EXPO and other events this year? See how Habsy works for sales teams, or book a demo of Habsy Platform.
Habsy is not affiliated with Messe Düsseldorf GmbH. Event details come from the official VALVE WORLD EXPO website and can change.
Frequently Asked Questions
When and where is VALVE WORLD EXPO 2026?
It takes place December 1 to 3, 2026, at Messe Düsseldorf in Düsseldorf. The exhibition venue scope is Halls 1 and 3.
What are the exhibition hours?
The exhibition is scheduled for 9:00 AM to 6:00 PM daily, local Europe/Berlin time.
Who can attend, and what registration is required?
The event is trade-only. Trade visitors must register and obtain an admission ticket through the official ticket shop. Check the official event information for current registration and ticket conditions.
Who is VALVE WORLD EXPO intended for?
Its industry scope includes industrial valves and flow control, process engineering, and energy and water infrastructure. Relevant professional groups include engineers, procurement teams, operators, maintenance teams, and equipment and service providers.
Is the technical conference covered by exhibition registration?
The co-located technical conference is organized by KCI and has separate registration conditions. Check its registration requirements and the location of your chosen session.
What should I ask suppliers about valve applications?
Clarify the process medium, operating pressure and temperature, connection and material requirements, actuator or control interfaces, maintenance access, and spare-parts needs. Note which requirements need further technical review.
How can I keep useful context from supplier conversations?
Save a business card or scan a QR code containing contact details, then add a short note about the application, technical constraints, and agreed next step. Habsy supports contact details, notes, reminders, and export; a protected organizer badge ID does not provide access to organizer records.
Can Habsy read every badge at VALVE WORLD EXPO 2026?
Habsy reads supported QR codes containing contact details. A proprietary registration ID or protected organizer link does not grant access to organizer records. Scan a business card or enter the details manually when needed.
Which Habsy features are free and which need Plus?
Free includes unlimited scanning, text notes, reminders, export and two digital business cards. Plus includes categories, voice notes, intent signals, follow-up templates, enquiry forms, analytics and integrations. Habsy Platform is a separate team offering.
How can a booth team organize contacts from VALVE WORLD EXPO 2026?
Agree the fields and follow-up responsibilities before the event. Habsy Platform brings team contacts and event reporting together. Shared visibility depends on connectivity and synchronization; confirm the team setup before arriving.
Can I scan VALVE WORLD EXPO badges with my phone?
Yes, if the badge carries a QR code or NFC chip with contact details: Habsy reads it with your phone, for free. If a badge only holds a registration number, scan the visitor's business card instead or add the contact manually.
Does VALVE WORLD EXPO offer lead retrieval for exhibitors?
Many trade shows sell lead retrieval through the organiser, so check the VALVE WORLD EXPO exhibitor services. You can also capture leads on your own phones with Habsy: scan badges and business cards, answer intent signals, a built-in lead qualification form: product interest, budget, timeline, answered in a few taps, and follow up after the show.
Going to VALVE WORLD EXPO 2026?
Capture every contact you make in Düsseldorf.
Share your digital card, capture business cards or supported contact QR codes, and retain the context for your next conversation.

